Xilinx MicroBlaze Reference Manual page 224

Latency
• 1 cycle with
• 2 cycles with
Note
The byte reversed instruction is only valid if MicroBlaze is configured to use reorder instructions
( C_USE_REORDER_INSTR = 1).
The extended address instruction is only valid if MicroBlaze is configured to use extended address
( C_ADDR_SIZE > 32).
MicroBlaze Processor Reference Guide
UG984 (v2016.2) June 8, 2016
UG984 (v2016.1) April 6, 2016
=0
C_AREA_OPTIMIZED
=1
C_AREA_OPTIMIZED
www.xilinx.com
Chapter 5: MicroBlaze Instruction Set Architecture
224
Send Feedback