Resource Utilization - Xilinx MicroBlaze Reference Manual

Resource Utilization

The MicroBlaze core resource utilization for various parameter configurations are measured
for the following devices:
• Virtex-7 (Table
• Kintex-7 (Table
• Artix-7 (Table
• Virtex UltraScale
• Kintex UltraScale
• Virtex UltraScale+
• Kintex UltraScale+
• Zynq UltraScale+
Zynq®-7000 results are expected to be similar to 7 series results.
Note:
The parameter values for each of the measured configurations are shown in
configurations directly correspond to the predefined templates in the MicroBlaze
Configuration Wizard.
Table A-2: Device Utilization - Virtex-7 FPGAs (XC7VX485T ffg1761-3)
Minimum Area
Maximum Performance
Maximum Frequency
Linux with MMU
Low-end Linux with MMU
Typical
MicroBlaze Processor Reference Guide
UG984 (v2016.2) June 8, 2016
UG984 (v2016.1) April 6, 2016
A-2)
A-3)
A-4)
(Table A-5)
(Table A-6)
(Table A-7)
(Table A-8)
(Table A-9)
Configuration
www.xilinx.com
Appendix A: Performance and Resource Utilization
LUTs
634
3725
905
3340
2807
1913
Table A-10. The
Device Resources
F
max
FFs
(MHz)
229 370
2917 213
541 370
3073 216
2460 228
1627 255
286
Send Feedback