Stream Link Interfaces - Xilinx MicroBlaze Reference Manual

Stream Link Interfaces

MicroBlaze can be configured with up to 16 AXI4-Stream interfaces, each consisting of one
input and one output port. The channels are dedicated uni-directional point-to-point data
streaming interfaces.
For detailed information on the AXI4-Stream interface, please refer to the AMBA 4 AXI4-
Stream Protocol Specification, Version 1.0
The interfaces on MicroBlaze are 32 bits wide. A separate bit indicates whether the
sent/received word is of control or data type. The get instruction in the MicroBlaze ISA is
used to transfer information from a port to a general purpose register. The put instruction
is used to transfer data in the opposite direction. Both instructions come in 4 flavors:
blocking data, non-blocking data, blocking control, and non-blocking control. For a
detailed description of the get and put instructions, please refer to
Instruction Set
Hardware Acceleration
Each link provides a low latency dedicated interface to the processor pipeline. Thus they are
ideal for extending the processors execution unit with custom hardware accelerators. A
simple example is illustrated in
This method is similar to extending the ISA with custom instructions, but has the benefit of
not making the overall speed of the processor pipeline dependent on the custom function.
Also, there are no additional requirements on the software tool chain associated with this
type of functional extension.
MicroBlaze Processor Reference Guide
UG984 (v2016.2) June 8, 2016
UG984 (v2016.1) April 6, 2016
Architecture.
Figure
Example code:
// Configure f
x
cput Rc,RFSLx
// Store operands
put Ra, RFSLx // op 1
put Rb, RFSLx // op 2
// Load result
Figure 2-25: Stream Link Used with HW Accelerated Function
www.xilinx.com
Chapter 2: MicroBlaze Architecture
(ARM IHI 0051A) document.
2-25. The code uses RFSLx to indicate the used link.
Link x
MicroBlaze
Register
File
Link x
Chapter 5, MicroBlaze
Custom HW Accelerator
Op1Reg Op2Reg
ConfigReg
f
x
ResultReg
f
x
87
Send Feedback