Xilinx MicroBlaze Reference Manual page 103

Table 2-56: Profiling Low Address Register (PLAR)
Bits Name
29:0 Low word
Profiling High Address Register
The Profiling High Address Register (PLAR) is used to define the high word address of the
profiled area. This register is a write-only register. Issuing a read request has no effect, and
undefined data is read.
31 30 29
↑
Reserved
Table 2-57: Profiling High Address Register (PHAR)
Bits Name
29:0 High word
Profiling Buffer Address Register
The Profiling Buffer Address Register (PBAR) is used to define the bin in the Profiling Buffer
to be read or written. This register has variable number of bits, depending on the parameter
C_DEBUG_PROFILE_SIZE. This register is a write-only register. Issuing a read request has
no effect, and undefined data is read.
31
Table 2-58: Profiling Buffer Address Register (PBAR)
Bits Name
n-1:0 Buffer
Address
MicroBlaze Processor Reference Guide
UG984 (v2016.2) June 8, 2016
UG984 (v2016.1) April 6, 2016
Low word address of the profiled area
High word address
Figure 2-37: Profiling High Address Register
High word address of the profiled area
↑
Reserved
Figure 2-38: Profiling Buffer Address Register
Bin in the Profiling Buffer to read or write. The number of bits (n) is 9
for a 4KB buffer, 10 for a 8KB buffer, ..., 14 for a 128KB buffer.
www.xilinx.com
Chapter 2: MicroBlaze Architecture
Description
↑
Description
n n-1
Description
Reset Value
0
0
Reset Value
0
0
↑
Buffer Address
Reset Value
0
103
Send Feedback