Dhcp Server Configuration Commands; Accounting Domain - 3Com 5500-EI PWR Reference Manual

1

DHCP Server Configuration Commands

IP filtering based on authenticated 802.1x clients are added. For specific commands, refer to
check dot1x
Support for removing DHCP snooping entries is added. For specific commands, refer to
dhcp-snooping.
DHCP Server Configuration Commands

accounting domain

Syntax
accounting domain domain-name
undo accounting domain
View
DHCP address pool view
Parameters
domain-name: Name of a domain, a string of 1 to 24 characters. (You can use the domain command to
create a domain.)
Description
Use the accounting domain command to enable the DHCP accounting function.
Use the undo accounting domain command to disable the DHCP accounting function.
Examples
# Enter system view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
# Enter DHCP address pool view.
[Sysname] dhcp server ip-pool test
# Enable the DHCP accounting function (assuming that domain 123 already exists).
[Sysname-dhcp-pool-test] accounting domain 123
enable.
1-1
ip
reset