Checking Parameters Changed From Their Initial Values (Initial Value Change List) - Mitsubishi Electric FR-F820-00046 Instruction Manual

Fr-f800 series
Hide thumbs Also See for FR-F820-00046:
Table of Contents

Advertisement

5.17
Checking parameters changed from their initial
values (initial value change list)
Parameters changed from their initial values can be displayed.
Operating procedure
1.
Turning ON the power of the inverter
The operation panel is in the monitor mode.
2.
Selecting the parameter setting mode
Press
to choose the parameter setting mode. (The parameter number read previously appears.)
3.
Selecting a parameter
Turn
to "
"
4.
Checking the Initial value change list
Turn
. The parameter numbers that have been changed from their initial value appear in order.
● When
is pressed with a changed parameter displayed, the parameter settings can be changed as they are.
(Parameter numbers are no longer displayed in the list when they are returned to their initial values.)
Other changed parameters appear by turning
● The indication returns to "
NOTE
• The calibration parameters (C0 (Pr.900) to C7 (Pr.905), C42 (Pr.934) to C45 (Pr.935)) are not displayed even when these
are changed from the initial settings.
• Only the simple mode parameters are displayed when the simple mode is set (Pr.160 ="9999").
• Only user groups are displayed when user groups are set (Pr.160 = "1").
• Pr.160 is displayed independently of whether the setting value is changed or not.
• Parameter setting using the Initial value change list is also possible.
" (Initial value change list), and press
" appears.
" when the last changed parameter is displayed.

5.17 Checking parameters changed from their initial values (initial value change list)

.
.
1
2
3
4
5
6
7
8
9
10
559
5. PARAMETERS

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents