Mitsubishi Electric FR-F820-00046 Instruction Manual page 615

*1 The applicable motor capacity indicated is the maximum capacity applicable for use of the Mitsubishi Electric 4-pole standard motor.
*2 The rated output capacity is the value with respect to 440 V output voltage.
*3 The percentage of the overload current rating is the ratio of the overload current to the inverter's rated output current. For repeated duty, allow
time for the inverter and motor to return to or below the temperatures under 100% load.
*4 The maximum output voltage does not exceed the power supply voltage. The maximum output voltage can be changed within the setting range.
However, the maximum point of the voltage waveform at the inverter output side is the power supply voltage multiplied by about
*5 The rated input current is the value at a rated output voltage. The input power impedances (including those of the input reactor and cables) affect
the value.
*6 The power supply capacity is the value at the rated output current. The input power impedances (including those of the input reactor and cables)
affect the value.
*7 FR-DU08: IP40 (except for the PU connector)
*8 For the power voltage exceeding 480 V, set Pr.977 Input voltage mode selection. (For details, refer to
614
8. SPECIFICATIONS
8.1 Inverter rating
√ .
2
page 195.)