M) Item And Output Signal For Monitoring - Mitsubishi Electric FR-F820-00046 Instruction Manual

5.8

(M) Item and output signal for monitoring

Purpose
To display the motor speed (the number of
rotations per minute)
To switch the unit of measure to set the
operation speed from frequency to motor
speed
To change the item monitored on the
operation panel and parameter unit
To change the monitor item whose data is
output via terminal FM (CA) or AM
To adjust the output via terminal FM (CA) or
AM
To check the effects of energy saving
To assign functions to the output terminals
To detect the output frequency
To detect the output current
To detect the output torque
To use the remote output function
To use the analog remote output function
To output the fault code via a terminal
To detect the specified output power
To detect the control circuit temperature
5.8.1 Speed indication and its setting change to
rotations per minute
The frequency monitored or set on the operation panel can be changed to the motor speed or the machine speed.
Pr. Name
37
Speed display
M000
505 Speed setting
M001 reference
144 Speed setting
M002 switchover
286
5. PARAMETERS
5.8 (M) Item and output signal for monitoring
Speed indication and its
setting change to
rotations per minute
Operation panel monitor
item selection
Cumulative monitor
value clear
Terminal FM (CA)
function selection
Terminal FM (CA)/AM
calibration
Energy saving
monitoring
Output terminal function
assignment
Up-to-frequency
sensitivity
Output frequency
detection
Low speed detection
Output current detection
Zero current detection
Output torque detection
Remote output
Analog remote output
Fault code output
function
Pulse train output of
output power
Control circuit
temperature monitoring
Initial value
Setting range
FM CA
0
0
1 to 9998
60 Hz 50 Hz 1 to 590 Hz
0, 2, 4, 6, 8, 10, 12, 102,
4
104, 106, 108, 110, 112
Parameter to set
P.M000 to P.M002
P.M020 to P.M023,
P.M030, P.M031,
P.M044, P.M045,
P.M050 to P.M052,
P.M100 to P.M104
P.M040 to P.M042,
P.M044, P.M300,
P.M301, P.D100
P.M310, P.M320,
P.M321, P.M330 to
P.M334
P.M023, P.M100,
P.M200 to P.M207,
P.M300, P.M301
P.M400 to P.M406,
P.M410 to P.M416,
P.M420 to P.M422,
P.M431
P.M440 to P.M444
P.M460 to P.M464
P.M470
P.M500 to P.M502
P.M530 to P.M534
P.M510
P.M520
P.M060
Monitoring and setting of frequency
Set a number for the speed of machine operated at the
*1
speed (frequency) set in Pr.505.
Set the reference speed (frequency) for Pr.37.
Set the number of motor poles for the indication of the
motor speed.
Refer to
page
Pr.37, Pr.144, Pr.505 286
Pr.52, Pr.170,
Pr.171, Pr.268,
Pr.290, Pr.563,
Pr.564, Pr.774 to 288
Pr.776, Pr.891,
Pr.992, Pr.1018,
Pr.1106 to Pr.1108
Pr.54, Pr.55, Pr.56,
Pr.158, Pr.290, 297
Pr.291, Pr.866
Pr.867, Pr.869, C0
(Pr.900), C1
302
(Pr.901), C8 (Pr.930)
to C11 (Pr.931)
Pr.52, Pr.54, Pr.158,
306
Pr.891 to Pr.899
Pr.190 to Pr.196,
Pr.289, Pr.313 to 312
Pr.322
Pr.41 to Pr.43, Pr.50,
319
Pr.870
Pr.150 to Pr.153,
321
Pr.166, Pr.167
Pr.864 323
Pr.495 to Pr.497 324
Pr.655 to Pr.659 325
Pr.76 327
Pr.799 328
Pr.663 329
Description