Checking Parameters Changed From Their Initial Values (Initial Value Change List) - Mitsubishi Electric FR-A820-00046 Instruction Manual

Checking parameters changed from their initial values (Initial value change list)

5.20 Checking parameters changed from their initial values
(Initial value change list)
Parameters changed from their initial values can be displayed.
Turning ON the power of the inverter
The monitor display turns ON.
Parameter setting mode
Press
Selecting the parameter number
Turn
"
Checking the initial value change list
Turn
If
(Parameter numbers are no longer displayed in the list when they are returned to their initial values.)
Other changed parameters appear by turning
"
Tab. 5-340: Initial value change list
NOTES The calibration parameters (C0 (Pr. 900) to C7 (Pr. 905), C42 (Pr. 934) to C45 (Pr. 935)) are not dis-
played even when these are changed from the initial settings.
Only the simple mode parameters are displayed when the simple mode is set (Pr. 160 = "9999 (ini-
tial value)").
Only user groups are displayed when user groups are set (Pr. 160 = "1").
Pr. 160 is displayed independently of whether the setting value is changed or not.
Parameter setting using the initial value change list is also possible.
5 - 746
to choose the parameter setting mode. (The parameter number read previously appears.)
to " " (Initial value change list) and press
" appears.
. The parameter numbers that have been changed from their initial value appear in order.
is pressed with parameters that have been changed, the parameter settings can be changed as they are.
" is returned to when the last changed parameter is displayed.
Operation
.
.
Parameters