Download  Print this page

Checking Parameters Changed From Their Initial Values (initial Value Change List) - Mitsubishi Electric FR-CS84-012 Instruction Manual

Freqrol-cs80.
Hide thumbs

Advertisement

5.14
Checking parameters changed from their initial
values (initial value change list)
Parameters changed from their initial values can be displayed.
Operating procedure
1.
Turning ON the power of the inverter
The operation panel is in the monitor mode.
2.
Selecting the parameter setting mode
Press
3.
Selecting the parameter
Press
"
4.
Checking the initial value change list
Press
● When
(Parameter numbers are no longer displayed in the list when they are returned to their initial values.)
Other changed parameters appear by pressing
● The indication returns to "
NOTE
• Calibration parameters (C0 (Pr.900) to C7 (Pr.905)) are not displayed even when these are changed from the initial settings.
• Parameter setting using the initial value change list is also possible.
204
5. PARAMETERS

5.14 Checking parameters changed from their initial values (initial value change list)

to choose the parameter setting mode. (The parameter number read previously appears.)
or
to display "
" appears.
or
to display the parameter numbers that have been changed from their initial value in order.
is pressed with a changed parameter displayed, the setting change process of the parameter starts.
" (initial value change list), and press
or
.
" after the last changed parameter is displayed.
.

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric FR-CS84-012

   Related Content for Mitsubishi Electric FR-CS84-012

Comments to this Manuals

Symbols: 0
Latest comments: