Mitsubishi Electric FR-F820-00046 Instruction Manual page 465

NOTE
• The auto storage function may fail if the EEPROM is accessed by other functions at the same time at power OFF. To ensure
the auto storage, provide a power source for the control circuit separately from that of the main circuit.
 User parameter reading from EEPROM
• User parameters (Pr.1150 to Pr.1199) are read from RAM or EEPROM according to the settings in Pr.342
Communication EEPROM write selection and Pr.414 PLC function operation selection. When Pr.414 = "11 or 12",
RAM data is read regardless of the Pr.342 setting.
Device
Inverter (via communication),
FR Configurator2
Communication option
Parameter unit
Operation panel
NOTE
• For the details of the PLC function, refer to the PLC Function Programming Manual and the Instruction Manual of FR
Configurator2.
 Copying the PLC function project data to USB memory
• This function copies the PLC function project data to a USB memory device. The PLC function project data copied in the
USB memory device can be copied to other inverters. This function is useful in backing up the parameter setting and for
allowing multiple inverters to operate by the same sequence programs.
• Refer to page 74
464
5. PARAMETERS
5.11 (A) Application parameters
Pr.342 Pr.414
0, 1, 2
0
11, 12
0, 1, 2
1
11, 12
0, 1, 2
0
11, 12
0, 1, 2
1
11, 12
0, 1, 2
0
11, 12
0, 1, 2
1
11, 12
for an outline of the USB communication function.
Read from
EEPROM
RAM
RAM
RAM
(Differs according to the option type.)
RAM
RAM
RAM
EEPROM
RAM
EEPROM
RAM
Written to
EEPROM
RAM
EEPROM
RAM
EEPROM
RAM