Stop Selection - Mitsubishi Electric FR-F820-00046 Instruction Manual

Pr.13 Starting frequencypage

5.13.10 Stop selection

Select the stopping method (deceleration stop or coasting) at turn-OFF of the start signal.
Coasting can be selected for the cases such that the motor is stopped with a mechanical brake at turn-OFF of the start signal.
The operation of the start signal (STF/STR) can be selected. (For the start signal selection, refer to
Pr. Name
250 Stop
G106 selection
*1 For the start signal selection, refer to
 To decelerate the motor to a stop
• Set Pr.250 = "9999 (initial value) or 8888".
• The motor is decelerated to a stop when the start signal (STF/STR) is turned OFF.
 To coast the motor to a stop
• Set the time required to shut off the output after the start signal is turned OFF in Pr.250. When "1000 to 1100" is set, output
is shut off after a lapse of the (Pr.250 - 1000) seconds.
• The output is shut off after a lapse of the setting time of Pr.250 when the start signal is turned OFF. Motor coasts to a stop.
• The RUN signal is turned OFF when the output is shut off.
538
5. PARAMETERS
5.13 (G) Control parameters
225, page 226
Initial value Setting range
0 to 100 s
1000 to 1100 s
9999
9999
8888
page 359.
Start
ON
signal
RUN
signal
Start signal ON
RUN signal
Start signal (STF/STR)
STF signal: Forward rotation start
STR signal: Reverse rotation start
STF signal: Start signal
STR signal: Forward/reverse rotation
signal
STF signal: Forward rotation start
STR signal: Reverse rotation start
STF signal: Start signal
STR signal: Forward/reverse rotation
signal
Deceleration starts
when start signal turns OFF
Deceleration time
(Time set in Pr. 8, etc.)
DC brake
Time
OFF
OFF
ON
Output is shut off when
set time elapses after
start signal turns OFF
Pr.250
Motor coasts to stop
Time
OFF
OFF
ON
page 359.)
Description
*1
Stop operation
The motor coasts to a stop after a
lapse of the setting time when the
start signal is turned OFF.
The motor coasts to a stop after a
lapse of the (Pr.250 - 1000)
seconds when the start signal is
turned OFF.
The motor is decelerated to a stop
when the start signal is turned OFF.