Mitsubishi Electric FR-F820-00046 Instruction Manual page 566

 Fault history clearing procedure
• Set Err.CL Fault history clear = "1" to clear the fault history.
Operating procedure
1.
Turning ON the power of the inverter
The operation panel is in the monitor mode.
2.
Selecting the parameter setting mode
Press to choose the parameter setting mode. (The parameter number read previously appears.)
3.
Selecting the parameter number
Turn until "
(initial value) appears.
4.
Fault history clear
Turn to change the set value to "
" " and "
• Turn to read another parameter.
• Press to show the setting again.
• Press twice to show the next parameter.
" (Fault history clear) appears. Press
". Press
" are displayed alternately after parameters are cleared.
to read the present set value. "
to start clearing.
6. PROTECTIVE FUNCTIONS
6.3 Check and clear of the fault history
1
2
3
4
5
"
6
7
8
9
10
565