Basic Operation Of The Operation Panel - Mitsubishi Electric FR-F820-00046 Instruction Manual

4.1.2

Basic operation of the operation panel

 Basic operation
Operation mode switchover/Frequency setting
External operation mode
First screen (Output frequency
∗5
Hold down
*1 For the details of operation modes, refer to
*2 The monitor item can be changed. (Refer to
*3 For the details of the trace function, refer to
*4 For the details of fault history, refer to
*5 The USB memory mode indication appears while a USB memory device is connected. (Refer to
108
4. BASIC OPERATION
4.1 Operation panel (FR-DU08)
∗1( displayed at power-ON)
Change the setting.
∗2 monitoring)
Parameter clear
Group parameter setting Automatic parameter setting
(Example)
Fault record 1
The last eight fault records can be displayed. (On the display of the last fault record
(fault record 1), a decimal point LED is ON.)
When the fault history is empty,
page
page
page 568.
∗1
PU operation mode
Second screen
∗2
(Output current monitoring)
Change the setting.
All parameter clear Fault history clear
IPM initialization
∗3
Trace function
(Example)
Blinking
∗4
Fault record 2
228.
page 288.)
465. For the details of the PID gain tuning, refer to
PU Jog operation mode
Alternating
(Example)
Frequency setting written and complete
Third screen
∗2
(Output voltage
The present setting is
displayed.
Alternating
(Example)
Parameter write complete
Parameter copy
Initial value change list
∗3
PID gain tuning
(Example)
Blinking Blinking
∗4
Fault record 8
is displayed.
page 417.
page 74.)
∗1
monitoring)
∗4