Mitsubishi Electric FR-F820-00046 Instruction Manual page 522

 ANNEX A - PROTOCOL IMPLEMENTATION CONFORMANCE
STATEMENT (NORMATIVE)
(This annex is part of this Standard and is required for its use.)
BACnet Protocol Implementation Conformance Statement
Date: 1st Jul 2014
Vendor Name: Mitsubishi Electric Corporation
Product Name: Inverter
Product Model Number: FR-F820-1, FR-F820-2, FR-F840-1, FR-F840-2, FR-F842-1, FR-F842-2
Application Software Version: 8463*
Firmware Revision: 1.00
BACnet Protocol Revision: 4
Product Description:
BACnet Standardized Device Profile (Annex L):
BACnet Operator Workstation (B-OWS)
BACnet Building Controller (B-BC)
BACnet Advanced Application Controller (B-AAC)
BACnet Application Specific Controller (B-ASC)
BACnet Smart Sensor (B-SS)
BACnet Smart Actuator (B-SA)
List all BACnet Interoperability Building Blocks Supported (Annex K):
DS-RP-B, DS-WP-B, DM-DDB-B, DM-DOB-B, DM-DCC-B , DM-RD-B
Segmentation Capability:
Segmented requests supported
Segmented responses supported
Standard Object Types Supported:
An object type is supported if it may be present in the device. For each standard Object Type supported provide the following
data:
1.
Whether objects of this type are dynamically creatable using the CreateObject service
2.
Whether objects of this type are dynamically deletable using the DeleteObject service
3.
List of the optional properties supported
4.
List of all properties that are writable where not otherwise required by this standard
5.
List of all properties that are conditionally writable where not otherwise required by this standard
6.
List of proprietary properties and for each its property identifier, datatype, and meaning
7.
List of any property range restrictions
Dynamic object creation and deletion is not supported.
To check the object types supported by the FR-F800 series, refer to
Window Size
Window Size
page 514.
5.12 (N) Communication operation parameters
1
2
3
4
5
6
7
8
9
10
521
5. PARAMETERS