Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 829

IP 4 S A C
V OFTWARE CCESS ONTROL
- (
ACCESS LIST STANDARD NUMBERED
You can either create access-lists from within this command, or you can enter
access-list followed by only the number. Entering only the number moves you to
the IPv4 Standard ACL Configuration mode for the selected access-list. From there
you can configure your access-lists by using the command
numbered
NOTE
To create ACL number 67 that will deny packets from subnet 172.16.10, use the
Examples
commands:
awplus#
awplus(config)#
Alternatively, to enter the IPv4 Standard ACL Configuration mode to create the
ACL filter and deny packets from subnet 172.16.10.0 for the standard
numbered access-list 67, use the commands:
awplus#
awplus(config)#
awplus(config-ip-std-acl)#
Related (access-list standard named filter)
Commands
show running-config
show ip access-list
613-50157-01 Rev C
L (ACL) C
IST OMMANDS
)
filter).
: Software ACLs will deny access unless explicitly permitted by an ACL action.
configure terminal
access-list 67 deny 172.16.10.0 0.0.0.255
configure terminal
access-list 67
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
deny 172.16.10.0 0.0.0.255
(access-list standard
829