Ip Igmp Version - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

IGMP S C
NOOPING OMMANDS

IP IGMP VERSION

ip igmp version
Overview Use this command to set the current IGMP version (IGMP version 1, 2 or 3) on an
interface.
Use the no variant of this command to return to the default version.
Syntax ip igmp version <1-3>
no ip igmp version
Default The default IGMP version is 3.
Mode Interface Configuration for a VLAN interface.
Example To set the IGMP version to 2 for vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related show ip igmp interface
Commands
613-50157-01 Rev C
Parameter Description
version <1-3>
IGMP protocol version number
configure terminal
interface vlan2
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
ip igmp version 2
721