802.1X Commands; Introduction; Chapter 28: 802.1X Commands - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

28

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
802.1X port access control. For more information, see the
Authentication_Feature Overview and Configuration Guide
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
613-50157-01 Rev C

802.1X Commands

"debug dot1x" on page 907
"dot1x control-direction" on page 908
"dot1x eap" on page 910
"dot1x eapol-version" on page 911
"dot1x initialize interface" on page 913
"dot1x initialize supplicant" on page 914
"dot1x keytransmit" on page 915
"dot1x max-auth-fail" on page 916
"dot1x max-reauth-req" on page 918
"dot1x port-control" on page 920
"dot1x timeout tx-period" on page 922
"show debugging dot1x" on page 924
"show dot1x" on page 925
"show dot1x diagnostics" on page 928
"show dot1x interface" on page 930
"show dot1x sessionstatistics" on page 935
"show dot1x statistics
"show dot1x supplicant" on page 937
"show dot1x supplicant
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
interface" on page 936
interface" on page 939
AAA and Port
905