Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 556

P E C
OWER OVER THERNET OMMANDS
-
POWER INLINE PRIORITY
Examples To set the priority level to high on port1.0.1 to port1.0.4, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To reset the priority level to the default of low on port1.0.1 to port1.0.4, use the
following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related power-inline usage-threshold
Commands
show power-inline
show power-inline interface
show running-config
613-50157-01 Rev C
configure terminal
interface port1.0.1-port1.0.4
power-inline priority high
configure terminal
interface port1.0.1-port1.0.4
no power-inline priority
power-inline
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
556