Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 985

A C
UTHENTICATION OMMANDS
-
AUTH TWO STEP ENABLE
To enable MAC-Authentication followed by Web-Authentication, use the
following commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
To enable 802.1X-Authentication followed by Web-Authentication, use the
following commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
awplus(config-if)#
To enable the two step authentication feature for authentication profile 'student',
use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
To disable the two step authentication feature for authentication profile 'student',
use the commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
Validation show startup-config
Commands
show auth supplicant
show dot1x supplicant
613-50157-01 Rev C
configure terminal
interface port1.0.2
switchport mode access
auth-mac enable
auth-web enable
auth dynamic-vlan-creation
auth two-step enable
configure terminal
interface port1.0.2
switchport mode access
auth-web enable
dot1x port-control auto
auth dynamic-vlan-creation
auth two-step enable
configure terminal
auth profile student
configure terminal
auth profile student
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
auth two-step enable
no auth two-step enable
985