Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 788

IP 4 H A C
V ARDWARE CCESS ONTROL
( ACL: IP
NAMED HARDWARE PROTOCOL ENTRY
Table 24-5: Parameters in IP protocol ACL entries (cont.)
613-50157-01 Rev C
L (ACL) C
IST OMMANDS
)
Parameter Description
any
dhcpsnooping
host <ip-addr>
<ip-addr>/<prefix>
<ip-addr>
<reverse-mask>
<dest-ip>
The destination addresses to match against. You can specify a
single host, a subnet, or all destination addresses. The following
are the valid formats for specifying the destination:
any
host <ip-addr>
<ip-addr>/<prefix>
<ip-addr>
<reverse-mask>
<source-mac>
The source MAC address to match against. You can specify a
single MAC address, a range (through a mask), the address
learned from DHCP snooping, or any:
any
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Match any source IP address.
Match the source address learned
from the DHCP Snooping binding
database.
Match a single source host with the
IP address given by <ip-addr> in
dotted decimal notation.
Match any source IP address within
the specified subnet. Specify the
subnet by entering the IPv4
address, then a forward slash, then
the prefix length.
Match any source IP address within
the specified subnet. Specify the
subnet by entering a reverse mask
in dotted decimal format. For
example, entering "192.168.1.1
0.0.0.255" is the same as entering
192.168.1.1/24.
Match any destination IP address.
Match a single destination host with
the IP address given by <ip-addr> in
dotted decimal notation.
Match any destination IP address
within the specified subnet. Specify
the subnet by entering the IPv4
address, then a forward slash, then
the prefix length.
Match any destination IP address
within the specified subnet. Specify
the subnet by entering a reverse
mask in dotted decimal format. For
example, entering "192.168.1.1
0.0.0.255" is the same as entering
192.168.1.1/24.
Match against any source MAC
address.
788