Send-Lifetime - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

RIP C
OMMANDS
-
SEND LIFETIME

send-lifetime

Overview Use this command to specify the time period during which the authentication key
on a key chain can be sent.
send-lifetime <start-date> {<end-date>|
Syntax
duration <seconds>|infinite}
no send-lifetime
Mode Keychain-key Configuration
Example The following example shows the setting of send-lifetime for key 1 on the key
chain named "mychain".
awplus#
awplus(config)#
awplus(config-keychain)#
awplus(config-keychain-key)#
04:04:02 Dec 6 2016
613-50157-01 Rev C
Parameter Description
Specifies the start time and date in the format: 
<start-date>
<hh:mm:ss> <day> <month> <year> or 
<hh:mm:ss> <month> <day> <year>, where:
<hh:mm:ss>
<day>
<month>
<year>
Specifies the end time and date in the format: 
<end-date>
<hh:mm:ss> <day> <month> <year> or 
<hh:mm:ss> <month> <day> <year>, where:
<hh:mm:ss>
<day>
<month>
<year>
<seconds> <1-2147483646> Duration of the key in seconds.
infinite
Never expires.
configure terminal
key chain mychain
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
The time of the day, in hours, minutes and
seconds
<1-31> The day of the month
The month of the year (the first three letters of
the month, for example, Jan)
<1993-2035> The year
The time of the day, in hours, minutes and
seconds
<1-31> The day of the month
The month of the year (the first three letters of
the month, for example, Jan)
<1993-2035> The year
key 1
send-lifetime 03:03:01 Jan 3 2016
689