Ipv6 Mld Snooping Fast-Leave - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

MLD S C
NOOPING OMMANDS
6 -
IPV MLD SNOOPING FAST LEAVE

ipv6 mld snooping fast-leave

Overview Use this command to enable MLD Snooping fast-leave processing. Fast-leave
processing is analogous to immediate-leave processing; the MLD
group-membership is removed as soon as an MLD leave group message is
received, without sending out a group-specific query.
Use the no variant of this command to disable fast-leave processing.
ipv6 mld snooping fast-leave
Syntax
no ipv6 mld snooping fast-leave
Default MLD Snooping fast-leave processing is disabled.
Mode Interface Configuration for a specified VLAN interface or a range of VLAN
interfaces.
Usage This MLD Snooping command can only be configured on VLAN interfaces.
Examples This example shows how to enable fast-leave processing on the VLAN interface
vlan2.
awplus#
awplus(config)#
awplus(config-if)#
This example shows how to enable fast-leave processing on the VLAN interface
vlan2- vlan4.
awplus#
awplus(config)#
awplus(config-if)#
613-50157-01 Rev C
configure terminal
interface vlan2
ipv6 mld snooping fast-leave
configure terminal
interface vlan2-vlan4
ipv6 mld snooping fast-leave
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
743