Access-List (Standard Numbered) - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

IP 4 S A C
V OFTWARE CCESS ONTROL
- (
ACCESS LIST STANDARD NUMBERED

access-list (standard numbered)

Overview This command configures a standard numbered access-list that permits or denies
packets from a specific source IP address. You can either create a standard
numbered ACL together with an ACL filter entry in the Global Configuration mode,
or you can use the IPv4 Standard ACL Configuration mode for sequenced ACL filter
entry after first entering an access-list number.
The no variant of this command removes a specified standard numbered
access-list.
access-list {<1-99>|<1300-1999>}
Syntax
[list-number]
no access-list {<1-99>|<1300-1999>}
access-list {<1-99>|<1300-1999>} {deny|permit} <source>
Syntax [deny|
permit]
no access-list {<1-99>|<1300-1999>} {deny|permit} <source>
Mode Global Configuration
Default Any traffic controlled by a software ACL that does not explicitly match a filter is
denied.
Usage Use this command when configuring a standard numbered access-list for filtering
IP software packets.
613-50157-01 Rev C
L (ACL) C
IST OMMANDS
)
Parameter Description
<1-99>
IP standard access-list.
<1300-1999>
IP standard access-list (expanded range).
Parameter Description
<1-99>
IP standard access-list.
<1300-1999>
IP standard access-list (expanded range).
deny
Access-list rejects packets from the specified source.
permit
Access-list accepts packets from the specified source.
<source>
The source address of the packets. You can specify a single host, a
subnet, or all sources. The following are the valid formats for
specifying the source:
<ip-addr>
<reverse-mask>
any
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Enter an IPv4 address followed by a reverse
mask in dotted decimal format. For example,
entering 192.168.1.1 0.0.0.255 is
the same as entering 192.168.1.1/24.
Matches any source IP address.
828