Show Mls Qos Interface Queue-Counters - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Q S C
O OMMANDS
SHOW MLS QOS INTERFACE QUEUE

show mls qos interface queue-counters

Overview This command displays an interface's egress queue counters. This can either be for
a specific queue or for all queues on the interface. If no queue is specified all queue
counters on the interface will be displayed.
The counters show the number of frames currently in the queue and the maximum
number of frames allowed in the queue, for individual egress queues and the port's
queue (which will be a sum of all egress queues).
show mls qos interface <port> queue-counters [queue <number>]
Syntax
Mode User Exec and Privileged Exec
Example To show the counters for all queues on port1.0.1, use the command:
awplus#
Output Figure 27-6: Example output from the show mls qos interface queue-counters
Table 29: Parameters in the output of the show mls qos interface
613-50157-01 Rev C
-
COUNTERS
show mls qos interface port1.0.1 queue-counters
command

Interface port1.0.4 Queue Counters:
Port queue length
Egress Queue length:
Queue 0
Queue 1
Queue 2
Queue 3
Queue 4
Queue 5
Queue 6
Queue 7
queue-counters command
Parameter
Interface
Port queue length
Egress Queue length
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
1169
0
0
1169
0
0
0
0
0
Description
Port we are showing the counters for.
Number of frames in the port's queue. This will be the
sum of all egress queues on the port.
Number of frames in a specific egress queue.
890