Access-List (Numbered Hardware Acl For Tcp Or Udp) - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Centrecom fs980m series fast ethernet managed access switches alliedware plus version 5.4.7-0.x
Hide thumbs Also See for CentreCOM FS980M/9:
Table of Contents

Advertisement

IP
4 H
A
C
V
ARDWARE
CCESS
ONTROL
-
(
ACCESS
LIST
NUMBERED HARDWARE
access-list (numbered hardware ACL for TCP
or UDP)
Overview
This command creates an access-list for use with hardware classification. The
access-list will match on TCP or UDP packets that have the specified source and
destination IP addresses and optionally, port values. You can use the value any
instead of source or destination IP address if an address does not matter.
Once you have configured the ACL, you can use the
access-group
You can use the optional vlan parameter to match tagged (802.1q) packets.
The no variant of this command removes the specified IP hardware access-list.
access-list <3000-3699> <action> {tcp|udp} <source-ip> [eq
Syntax
<0-65535>] <dest-ip> [eq <0-65535>] [vlan <1-4094>]
no access-list <3000-3699>
613-50157-01 Rev C
L
(ACL) C
IST
OMMANDS
ACL
TCP
UDP)
FOR
OR
command to apply this ACL to a port or QoS class-map.
Parameter
Description
<3000-3699>
An ID number for this hardware IP access-list.
<action>
The action that the switch will take on matching packets:
deny
permit
send-to-cpu
tcp
Match against TCP packets.
udp
Match against UDP packets.
<source-ip>
The source addresses to match against. You can specify a single
host, a subnet, or all source addresses. The following are the valid
formats for specifying the source:
any
host <ip-addr>
<ip-addr>/<prefix>
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
access-group
or the
Reject packets that match the
source and destination filtering
specified with this command.
Permit packets that match the
source and destination filtering
specified with this command.
Send matching packets to the CPU.
Match any source IP address.
Match a single source host with the
IP address given by <ip-addr> in
dotted decimal notation.
Match any source IP address within
the specified subnet. Specify the
subnet by entering the IPv4 address,
then a forward slash, then the prefix
length.
match
774

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents