Match Mac-Type - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Q S C
O OMMANDS
-
MATCH MAC TYPE

match mac-type

Overview Use this command to set the MAC type for a class-map to match on.
Use no variant of this command to remove the MAC type match entry.
Syntax match mac-type {l2bcast|l2mcast|l2ucast}
no match mac-type
Mode Class Map Configuration
Examples To set the class-map's MAC type to Layer 2 multicast, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
To remove the class-map's MAC type entry, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
613-50157-01 Rev C
Parameter Description
l2bcast
Layer 2 Broadcast traffic.
l2mcast
Layer 2 Multicast traffic.
l2ucast
Layer 2 Unicast traffic.
configure terminal
class-map cmap1
configure terminal
class-map cmap1
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
match mac-type l2mcast
no match mac-type
866