Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 118

F C M
ILE AND ONFIGURATION ANAGEMENT
-
SHOW RUNNING CONFIG INTERFACE
To display the current running configuration of a device for VLAN 1, use the
command:
awplus#
To display the current running configuration of a device for VLANs 1 and 3-5, use
the command:
awplus#
Output Figure 2-11: Example output from a show running-config interface port1.0.2
Related copy running-config
Commands
show running-config
613-50157-01 Rev C
C
OMMANDS
show running-config interface vlan1
show running-config interface vlan1,vlan3-vlan5
command
awplus#show running-config interface port1.0.2
!
interface port1.0.2
switchport
switchport mode access
!
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
118