Igmp Snooping Commands; Introduction; Chapter 22: Igmp Snooping Commands - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

22

Introduction

Overview Devices running AlliedWare Plus use IGMP (Internet Group Management Protocol)
and MLD (Multicast Listener Discovery) to track which multicast groups their clients
belong to. This enables them to send the correct multimedia streams to the correct
destinations. IGMP is used for IPv4 multicasting, and MLD is used for IPv6
multicasting.
This chapter describes the commands to configure IGMP Snooping.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
613-50157-01 Rev C
IGMP Snooping
"clear ip igmp" on page 702
"clear ip igmp group" on page 703
"clear ip igmp interface" on page 704
"debug igmp" on page 705
"ip igmp flood specific-query" on page 706
"ip igmp maximum-groups" on page 707
"ip igmp snooping" on page 709
"ip igmp snooping fast-leave" on page 710
"ip igmp snooping mrouter" on page 711
"ip igmp snooping querier" on page 712
"ip igmp snooping report-suppression" on page 713
"ip igmp snooping routermode" on page 714
"ip igmp snooping tcn query
"ip igmp static-group" on page 718
"ip igmp trusted" on page 720
"ip igmp version" on page 721
"show debugging igmp" on page 722
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Commands
solicit" on page 716
700