Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 859

Q S C
O OMMANDS
-
MATCH ACCESS GROUP
To configure a class-map named "cmap3", which matches traffic against access-list
"hw_acl", which allows IP traffic from any source to any destination, use the
commands:
awplus#
awplus(config)#
awplus(config-ip-hw-acl)#
awplus(config)#
awplus(config-cmap)#
Related class-map
Commands
613-50157-01 Rev C
configure terminal
access-list hardware hw_acl
class-map cmap3
match access-group hw_acl
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
permit ip any any
859