Show Telnet - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

U A C
SER CCESS OMMANDS

SHOW TELNET

show telnet
Overview This command shows the Telnet server settings.
show telnet
Syntax
Mode User Exec and Privileged Exec
Example To show the Telnet server settings, use the command:
awplus#
Output Figure 3-4:
Related clear line vty
Commands
service telnet
show users
telnet server
613-50157-01 Rev C
show telnet
Example output from the show telnet command
Telnet Server Configuration
------------------------------------------------------------
Telnet server
Protocol
Port
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
: Enabled
: IPv4,IPv6
: 23
155