Show Spanning-Tree Statistics Instance - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

S T C
PANNING REE OMMANDS
-
SHOW SPANNING TREE STATISTICS INSTANCE

show spanning-tree statistics instance

Overview This command displays BPDU (Bridge Protocol Data Unit) statistics for the specified
MST (Multiple Spanning Tree) instance, and all switch ports associated with that
MST instance.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show spanning-tree statistics instance <instance-id>
Syntax
Mode Privileged Exec
Example To display BPDU statistics information for MST instance 2, and all switch ports
associated with that MST instance, use the command:
awplus#
Output Figure 14-14: Example output from show spanning-tree statistics instance
Related show spanning-tree statistics
Commands
613-50157-01 Rev C
Parameter Description
<instance-id>
Specify an MSTP instance in the range 1-5.
show spanning-tree statistics instance 2
% % INST_PORT port1.0.3 Information & Statistics
% ----------------------------------------
% Config Bpdu's xmitted (port/inst)
% Config Bpdu's received (port/inst)
% TCN Bpdu's xmitted (port/inst)
% TCN Bpdu's received (port/inst)
% Message Age(port/Inst)
% port1.0.3: Forward Transitions
% Next State
% Topology Change Time
...
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
"Getting Started
Guide.
: (0/0)
: (0/0)
: (0/0)
: (0/0)
: (0/0)
: 0
: Learning
: 0
478