Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 73

F C M
ILE AND ONFIGURATION ANAGEMENT
When you copy a
file... Use this syntax:
Copying with SFTP sftp://[[<location>]/<directory>]
/<filename>
<hostname>-<stack_ID>/flash:[/][<
Copying to or from
directory>/]
stack member
<stack_member_filename>
Flash
Valid characters The filename and path can include characters from up to four categories. The
categories are:
1)
2)
3)
4)
Do not use spaces, parentheses or the + symbol within filenames. Use hyphens or
underscores instead.
Syntax for A leading slash (/) indicates the root of the current filesystem location.
directory listings
In commands where you need to specify the local filesystem's Flash base directory,
you may use flash or flash: or flash:/. For example, these commands are all the
same:
•
•
•
613-50157-01 Rev C
C
OMMANDS
uppercase letters: A to Z
lowercase letters: a to z
digits: 0 to 9
special symbols: most printable ASCII characters not included in the previous
three categories, including the following characters:
• -
• /
• .
• _
• @
• "
• '
• *
• :
• ~
• ?
dir flash
dir flash:
dir flash:/
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Example:
To specify a file in the top-level
directory of the server:
sftp://10.0.0.5/example.cfg
To specify a file in the configs directory
on member 2 of a stack named vcstack:
vcstack-2/flash:/configs/example.cfg
73