Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 74

F C M
ILE AND ONFIGURATION ANAGEMENT
Similarly, you can specify the USB storage device base directory with usb or usb:
or usb:/
You cannot name a directory or subdirectory flash, nvs, usb, card, tftp, scp, sftp
or http. These keywords are reserved for tab completion when using various file
commands.
In a stacked environment you can only access flash and nvs using the stack
member filepath (e.g. dir awplus-2/flash:/). To access a USB storage
device on a backup stack member, use the
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
613-50157-01 Rev C
C
OMMANDS
"autoboot enable" on page 76
"boot config-file" on page 77
"boot config-file backup" on page 79
"boot system" on page 80
"boot system backup" on page 82
"cd" on page 83
"copy (filename)" on page 84
"copy current-software" on page 86
"copy debug" on page 87
"copy running-config" on page 88
"copy startup-config" on page 89
"copy zmodem" on page 90
"create autoboot" on page 91
"delete" on page 92
"delete debug" on page 93
"dir" on page 94
"edit" on page 96
"edit (filename)" on page 97
"erase factory-default" on page 98
"erase startup-config" on page 99
"ip tftp source-interface" on page 100
"ipv6 tftp source-interface" on page 101
"mkdir" on page 102
"move" on page 103
"move debug" on page 104
"pwd" on page 105
"rmdir" on page 106
"show autoboot" on page 107
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
remote-login command.
74