Show System Pluggable - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

P C C
LUGGABLES AND ABLING OMMANDS

SHOW SYSTEM PLUGGABLE

show system pluggable
Overview This command displays brief pluggable transceiver information showing the
pluggable type, the pluggable serial number, and the pluggable port on the
device. Different types of pluggable transceivers are supported in different models
of device. See your Allied Telesis dealer for more information about the models of
pluggables that your device supports.
show system pluggable [<port-list>]
Syntax
Mode User Exec and Privileged Exec
Example To display brief information about all installed pluggable transceivers, use the
command:
awplus#
Output Figure 6-1:
awplus#show system pluggable 
System Pluggable Information

Port Vendor
--------------------------------------------------------------------------------
1.0.27 TE Connectivity
1.0.28 TE Connectivity
--------------------------------------------------------------------------------
Table 1: Parameters in the output from the show system pluggable command
613-50157-01 Rev C
Parameter Description
<port-list>
The ports to display information about. The port list can be:
• a switch port (e.g. port1.0.25)
• a continuous range of ports separated by a hyphen (e.g.
port1.0.27-1.0.28)
• a comma-separated list of ports and port ranges (e.g.
port1.0.25,port1.0.27-1.0.28)
show system pluggable
Example output from show system pluggable
Device
AT-StackXS/1.0
AT-StackXS/1.0
Parameter
Stack member
Port
Vendor
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Serial Number Datecode Type
13140191 13040300 1xCOPPER PAS
13140232 13040300 1xCOPPER PAS
Description
The stack member number.
Specifies the port number for the installed pluggable
transceiver.
Specifies the vendor's name for the installed pluggable
transceiver.
231