Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 554

P E C
OWER OVER THERNET OMMANDS
-
POWER INLINE MAX
See the
power monitoring at the PD.
Note the difference in power supplied from the PSE to the power available at the
PD due to line loss.
See the
about the difference between the power supplied from the PSE and the power
available at the PD.
Examples To set the maximum power supplied to ports in the range port1.0.1 to port1.0.4 to
6450mW per port, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To clear the user-configured maximum power supplied to port1.0.1, and revert to
using the default maximum power, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related show power-inline interface
Commands
show running-config
613-50157-01 Rev C

awplus#configure terminal

awplus(config)#interface port1.0.1

awplus(config-if)#power-line max 5300

% The maximum power has been rounded to 5450mW in hardware.
LLDP Feature Overview and Configuration Guide
PoE Feature Overview and Configuration Guide
configure terminal
interface port1.0.2-port1.0.4
configure terminal
interface port1.0.1
power-inline
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
power-inline max 6450
no power-inline max
for information about
for further information
554