Platform Jumboframe - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

S C
WITCHING OMMANDS

PLATFORM JUMBOFRAME

platform jumboframe
Overview This command enables the device to forward jumbo frames. See the
Feature Overview and Configuration Guide
When jumbo frame support is enabled, the maximum size of packets that the
device can forward is 10240 bytes.
The no variant of this command disables the device from forwarding jumbo
frames. This stops the ports from forwarding packets larger than VLAN tagged
frames (1522 bytes).
platform jumboframe
Syntax
no platform jumboframe
Default By default, jumbo frames is off.
Mode Global Configuration
Usage You must restart the device after entering this command for it to take effect. You
can use the
Example To enable the device to forward jumbo frames, use the following commands:
awplus#
awplus(config)#
Related show platform
Commands
show running-config
613-50157-01 Rev C
reboot command to restart the device.
configure terminal
platform jumboframe
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
for more information.
Switching
373