Debug Dot1X - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

802.1X C
OMMANDS
1
DEBUG DOT X

debug dot1x

Overview Use this command to enable 802.1X IEEE Port-Based Network Access Control
troubleshooting functions.
Use the no variant of this command to disable this function.
Syntax debug dot1x [all|auth-web|event|nsm|packet|timer]
no debug all dot1x
no debug dot1x [all|auth-web|event|nsm|packet|timer]
Mode Privileged Exec and Global Configuration
Usage This command turns on a mode where trace-level information is output during?
authentication conversations. Be aware that this is a very verbose output.? It is
mostly useful to capture this as part of escalating an issue to ATI support.
Examples Use this command without any parameters to turn on normal 802.1X debug
information.
awplus#
awplus#
Related show debugging dot1x
Commands
undebug dot1x
613-50157-01 Rev C
Parameter Description
all
Used with the no variant of this command exclusively; turns off all
debugging for 802.1X.
auth-web
Specifies debugging for 802.1X auth-web information.
events
Specifies debugging for 802.1X events.
nsm
Specifies debugging for NSM messages.
packet
Specifies debugging for 802.1X packets.
timer
Specifies debugging for 802.1X timers.
debug dot1x
show debugging dot1x
802.1X debugging status:
802.1X events debugging is
802.1X timer debugging is on
802.1X packets debugging is on
802.1X NSM debugging is on
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
907