Show Policy-Map - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Q S C
O OMMANDS
-
SHOW POLICY MAP

show policy-map

Overview Displays the policy-maps configured on the switch. The output also shows
whether or not they are connected to a port (attached / detached) and shows their
associated class-maps.
show policy-map [<name>]
Syntax
Mode User Exec and Privileged Exec
Example To display a listing of the policy-maps configured on the switch, use the command:
awplus#
Output Figure 27-11: Example output from the show policy-map command
Related service-policy input
Commands
613-50157-01 Rev C
Parameter Description
<name>
The name of a specific policy-map.
show policy-map
awplus#show policy-map

POLICY-MAP-NAME: myPolicy
State: attached
Default class-map action: permit 

CLASS-MAP-NAME: default
Policer counters enabled

CLASS-MAP-NAME: myClass
Match Mac Type: 2 l2mcast
Policer counters enabled
Remark CoS and CoS-Queue Map Index to 6
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
895