Trust Dscp - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Q S C
O OMMANDS

TRUST DSCP

trust dscp
Overview This command enables the premark-dscp map to send traffic to a particular egress
queue, based on a lookup DSCP value.
trust dscp
Syntax
no trust
Mode Policy-Map Configuration. Because policy-maps are applied to ports, you can think
of trust dscp as a per-port setting.
Examples To enable the premark-dscp map lookup for policy-map pmap1, use the
commands:
awplus#
awplus(config)#
awplus(config-pmap)#
To disable the premark-dscp map lookup for policy-map pmap1, use the
commands:
awplus#
awplus(config)#
awplus(config-pmap)#
Related mls qos map premark-dscp to
Commands
613-50157-01 Rev C
configure terminal
policy-map pmap1
trust dscp
configure terminal
policy-map pmap1
no trust
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
901