Police Single-Rate Action - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Q S C
O OMMANDS
-
POLICE SINGLE RATE ACTION

police single-rate action

Overview Configures a single-rate policer for a class-map.
police single-rate <rate> <number> <number> action drop-red
Syntax
Mode Policy Map Class Configuration
Usage You can use a policer to meter the traffic on a port and drop non-conforming (red)
packets.
Example To configure a single rate meter measuring traffic of 10 Mbps that drops a
sustained burst of traffic over this rate, use the commands:
awplus#
awplus(config)#
awplus(config-pmap)#
awplus(config-pmap-c)#
action drop-red
Related no police
Commands
613-50157-01 Rev C
Parameter Description
<rate>
Specify the maximum rate (1-16000000 kbps).
<number>
Specify any decimal number between 0 and 16777216. The switch
ignores these values.
action
Specify the action if the rate is exceeded.
drop-red
configure terminal
policy-map name
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
Drop the red packets.
class classname
police single-rate 10000 1875000 1875000
874