Show Mls Qos Interface Storm-Status - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Q S C
O OMMANDS
SHOW MLS QOS INTERFACE STORM

show mls qos interface storm-status

Overview Show the current configuration and status of the QoS Storm Protection (QSP) on
the given port.
show mls qos interface <port> storm-status
Syntax
Mode User Exec and Privileged Exec
Example To see the QSP status on port1.0.1, use the command:
awplus#
Output Figure 27-7: Example output from the show mls qos interface storm-status
Related storm-action
Commands
storm-downtime
storm-protection
storm-rate
storm-window
613-50157-01 Rev C
-
STATUS
Parameter Description
<port>
Switch port.
show mls qos interface port1.0.1 storm-status
command
Interface:
Storm-Protection:
Port-status:
Storm Action:
Storm Window:
Storm Downtime:
Timeout Remaining:
Last read data-rate: 0 kbps
Storm Rate:
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
port1.0.1
Enabled
Enabled
vlandisable
5000 ms
0 s
0 s
1000 kbps
891