Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 137

U A C
SER CCESS OMMANDS
(
FLOWCONTROL HARDWARE ASYN
Examples To enable hardware flow control on terminal console line asyn0, use the
commands:
awplus#
awplus(config)#
awplus(config-line)#
To disable hardware flow control on terminal console line asyn0, use the
commands:
awplus#
awplus(config)#
awplus(config-line)#
Related clear line console
Commands
show running-config
speed (asyn)
613-50157-01 Rev C
/ )
CONSOLE
configure terminal
line console 0
configure terminal
line console 0
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
flowcontrol hardware
no flowcontrol hardware
137