Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 761

IP 4 H A C
V ARDWARE CCESS ONTROL
-
ACCESS GROUP
Examples To add the numbered hardware access-list 3005 to switch port interface port1.0.1,
enter the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To add the named hardware access-list "hw-acl" to switch port interface port1.0.2,
enter the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To apply an ACL to static channel group 2 containing switch port1.0.5 and
port1.0.6, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
awplus(config)#
awplus(config-if)#
Related access-list hardware (named hardware ACL)
Commands
access-list (numbered hardware ACL for IP packets)
access-list (numbered hardware ACL for MAC addresses)
show interface access-group
613-50157-01 Rev C
L (ACL) C
IST OMMANDS
configure terminal
interface port1.0.1
access-group 3005
configure terminal
interface port1.0.2
access-group hw-acl
configure terminal
interface port1.0.5-1.0.6
static-channel-group 2
interface sa2
access-group 3000
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
761