Rip Restart Grace-Period - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

RIP C
OMMANDS
-
RIP RESTART GRACE PERIOD

rip restart grace-period

Overview Use this command to change the grace period of RIP graceful restart.
Use the no variant of this command to disable this function.
Syntax rip restart grace-period <1-65535>
no rip restart grace-period <1-65535>
Mode Global Configuration
Default The default RIP grace-period is 60 seconds.
Usage Use this command to enable the Graceful Restart feature on the RIP process.
Entering this command configures a grace period for RIP.
When a master failover happens on a VCStack, the RIP grace-period will be the
longest period between the default value (60 seconds is the default RIP
grace-period) and the configured RIP grace-period value from this command. So
the configured RIP grace-period value will not be used for a VCStack master
failover if it is shorter than the default RIP grace-period value.
awplus#
Example
awplus(config)#
613-50157-01 Rev C
configure terminal
rip restart grace-period 200
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
686