Wrr-Queue Disable Queues - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

Q S C
O OMMANDS
-
WRR QUEUE DISABLE QUEUES

wrr-queue disable queues

Overview Use this command to disable an egress queue from transmitting traffic.
The no variant of this command enables an egress queue to transmit traffic.
Syntax wrr-queue disable queues [0][1][2][3][4][5][6][7]
no wrr-queue disable queues [0][1][2][3][4][5][6][7]
Mode Interface Configuration
Examples To disable queue 1 from transmitting traffic, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To enable queue 1 to transmit traffic, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related show mls qos interface
Commands
613-50157-01 Rev C
Parameter Description
[0][2]...[7]
Selects one or more queues numbered 0 to 7.
configure terminal
interface port1.0.1
configure terminal
interface port1.0.1
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
wrr-queue disable queues 1
no wrr-queue disable queues 1
902