Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 887

Q S C
O OMMANDS
SHOW MLS QOS INTERFACE
Table 28: Parameters in the output of the show mls qos interface command
613-50157-01 Rev C
Egress Queue:
Status:
Scheduler:
Queue Limit:
Egress Rate Limit: 0 Kb
Egress Queue:
Status:
Scheduler:
Weight:
Queue Limit:
Egress Rate Limit: 0 Kb
Egress Queue:
Status:
Scheduler:
Weight:
Queue Limit:
Egress Rate Limit: 0 Kb
Egress Queue:
Status:
Scheduler:
Queue Limit:
Egress Rate Limit: 0 Kb
Egress Queue:
Status:
Scheduler:
Queue Limit:
Egress Rate Limit: 0 Kb
Egress Queue:
Status:
Scheduler:
Queue Limit:
Egress Rate Limit: 0 Kb
Parameter
Default CoS
Default Queue
Number of egress
queues
Egress Queue X
Status
Scheduler
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
2
Enabled
Strict Priority
12%
3
Enabled
Wrr Group 2
10
12%
4
Enabled
Wrr Group 1
10
12%
5
Enabled
Strict Priority
12%
6
Enabled
Strict Priority
12%
7
Enabled
Strict Priority
12%
Description
The default CoS priority that will be applied to all packets
arriving on this interface.
The default queue that will be applied to all packets
arriving on this interface.
The total number of egress queues available on this
interface.
Number of this egress queue.
Queue can either be enabled or disabled.
The scheduling mode being used for servicing the
transmission of packets on this port.
887