Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 750

MLD S C
NOOPING OMMANDS
6 -
IPV MLD STATIC GROUP
To add a static group record on a specific port on vlan2, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
port1.0.4
613-50157-01 Rev C
configure terminal
interface vlan2
ipv6 mld static-group ff1e::10 interface
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
750