Ipv6 Mld Snooping Report-Suppression - Allied Telesis CentreCOM FS980M/9 Command Reference Manual

MLD S C
NOOPING OMMANDS
6 -
IPV MLD SNOOPING REPORT SUPPRESSION

ipv6 mld snooping report-suppression

Overview Use this command to enable report suppression from hosts for Multicast Listener
Discovery version 1 (MLDv1) on a VLAN in Interface Configuration mode.
Use the no variant of this command to disable report suppression on a VLAN in
Interface Configuration mode.
Syntax ipv6 mld snooping report-suppression
no ipv6 mld snooping report-suppression
Default Report suppression does not apply to MLDv2, and is turned on by default for
MLDv1 reports.
Mode Interface Configuration for a specified VLAN interface or a range of VLAN
interfaces.
Usage This MLD Snooping command can only be configured on VLAN interfaces.
MLDv1 Snooping maybe configured to suppress reports from hosts. When a
querier sends a query, only the first report for particular set of group(s) from a host
will be forwarded to the querier by the MLD Snooping device. Similar reports (to
the same set of groups) from other hosts, which would not change group
memberships in the querier, will be suppressed by the MLD Snooping device to
prevent 'flooding' of query responses.
Examples This example shows how to enable report suppression for MLD reports on VLAN
interface vlan2:
awplus#
awplus(config)#
awplus(config-if)#
This example shows how to disable report suppression for MLD reports on VLAN
interface vlan2:
awplus#
awplus(config)#
awplus(config-if)#
This example shows how to enable report suppression for MLD reports on VLAN
interfaces vlan2-vlan4:
awplus#
awplus(config)#
awplus(config-if)#
613-50157-01 Rev C
configure terminal
interface vlan2
ipv6 mld snooping report-suppression
configure terminal
interface vlan2
no ipv6 mld snooping report-suppression
configure terminal
interface vlan2-vlan4
ipv6 mld snooping report-suppression
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
747