Allied Telesis CentreCOM FS980M/9 Command Reference Manual page 846

IP 6 S A C
V OFTWARE CCESS ONTROL
6 - (
IPV ACCESS LIST STANDARD NAMED
For backwards compatibility you can either create IPv6 standard access-lists from
within this command, or you can enter ipv6 access-list standard
followed by only the IPv6 standard access-list name. This latter (and preferred)
method moves you to the (config-ipv6-std-acl) prompt for the selected
IPv6 standard access-list, and from here you can configure the filters for this
selected IPv6 standard access-list.
NOTE
Example To enter the IPv6 Standard ACL Configuration mode for the access-list named
my-list, use the commands:
awplus#
awplus(config)#
awplus(config-ipv6-std-acl)#
Related (ipv6 access-list standard filter)
Commands
show ipv6 access-list (IPv6 Software ACLs)
show running-config
613-50157-01 Rev C
L (ACL) C
IST OMMANDS
)
: Software ACLs will deny access unless explicitly permitted by an ACL action.
configure terminal
ipv6 access-list standard my-list
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.7-0.x
846